RESCUE - RECOVERY
LIFTING BAGS - HEAVY LIFTING - VEHICLE RECOVERY
- HIGH PRESSURE
- CONVENTIONAL
- FLAT-FORM BAGS
- HIGH-LIFT BAGS
- SVLB LIGHT-DUTY
- MAXI-LIFT BAGS
- CUSTOM BAGS
HAZMAT CONTROL
AIRCRAFT RECOVERY
PIPE PLUGS/ PACKERS
UNDERGROUND ENGINEERING
SURFACE - WATER MANAGEMENT
OFFSHORE - OIL BOOMS
MILITARY RESCUE
MAXI-LIFT RECOVERY LIFTING BAGS
Max-Lift recovery lifting bags have a soft footprint which makes them ideal for lifting softer structures when the lifting force can be spread out over a wider area to minimize additional collateral damage. Bags have a positive-grip top and bottom pad which grips very well even when the load and the road are at right angles. Buy bags by the set to upright trucks, railcars, and other types of vehicles or structures.
| MAXI-LIFT RECOVERY LIFTING BAGS | ||||
| PART# | 527296 | 527297 | 527298 | |
| DIAMETER X HEIGHT | inch | 40"X18" | 53"X48" | 58"X84" |
| MINIMUM HEIGHT | inch | 3" | 3" | 3" |
| LIFTING CAPACITY | Lbs | 8,800 | 15,600 | 20,000 |
| MAXIMUM HEIGHT | inch | 18" | 48" | 84" |
| MAXIMUM PRESSURE | PSI | 7 | 7 | 7 |
| VOLUME | cu/ft | 13 | 61 | 111 |
| AIR REQUIREMENT | cu/ft | 78 | 368 | 770 |
SAVA VEHICLE RECOVERY DEMONSTRATION
INFLATION ACCESSORIES
Sava inflation accessories have been designed for precision control, high reliability and long life. Use only Sava controllers for maximum safety and performance.
HIGH VOLUME COMPRESSOR/VACUUM
High volume, air compressor will put out 100 CFM @7 psi. 8 hp Honda gas engine. Sava compressors are robust, reliable and will operate for many years. The compressor also has a reverse flow function for full vacuum operation which makes deflation fast and effortless.
8-PORT DISTRIBUTION MANIFOLD
8-Port manifold is made of lightweight aluminum for maximum heat dissipation and minimum corrosion. Gauges are heavy-duty stainless steel vented gauges with dual SAE/Metric scale. Overpressure relief valve and High-flow deflation valve.
10-Port manifolds are also available.
HOSE & COUPLERS
Proprietary locking claw couplers are solid brass. Couplers snap on with ease and lock down with a screw-on locking ring for positive connection that cannot leak or become disconnected. Hoses are solid reinforced synthetic rubber which remain pliable in the coldest weather and prevent collapsing during vacuum suction deflation. Temperature operating range: -40°F to +212° F (-40° C to +300° C)
